Tp Link Tl Sg105 Igmp Snooping
How to configure IGMP Snooping for IPTV network using L2 switch
User Application Requirement
Updated 06-28-2022 03:08:54 AM 
138804
This Article Applies to:
This FAQ is suitable for Easy Smart Switch, Smart Switch, L2 Managed Switch
IPTV service consists of three entities-multicast source, client device and multicast network. This Article will focus on the most frequently asked scenarios of IGMP snooping Multicast network in the Access Layer. And give you the respective suggested configuration guide.
Scenario:
IGMP snooping on L2 switch for Multicast network in the Access Layer.
Note: The gateway router must support IGMP proxy/query function or IGMP snooping on L2 switch will not piece of work every bit expected.
Topology:
Target/Requirement:
Using a TP-Link L2 switch's IGMP snooping feature to build upwardly a L2 multicast network to avoid broadcast of multicast data.
Configuration Guidance:
Every bit illustrated in the topology above, Internet Gateway Router is connected to the L2 switch via port i. "Fix top box" is connected to L2 switch via port two/iii/4 for IPTV service, port 5 of the switch is connected with Desktop and there is no IPTV service on information technology.
Hither we have Like shooting fish in a barrel Smart switch TL-SG105E and Smart Switch T1600G-28TS as the instances to show how to enable IGMP snooping. For L2 managed switch and L3 managed switch configuration on IGMP snooping, it is the aforementioned with the configuration of T1600G-28TS.
TL-SG105E Utility Configuration ：
Pace i: log in the Configuration Page of TL-SG105E.
Step 2: Enable IGMP Snooping in "Switching-IGMP Snooping"
T1600G-28TS Web GUI Configuration ：
Notation: Set top box and Desktop and Router are in the same VLAN 1, it is the factory default settings.
Step ane: Log in the Configuration Page of T1600G-28TS.
Stride 2: Enable IGMP Snooping in "Multicast-IGMP Snooping-Snooping Config"
Step three: Enable IGMP Snooping for port ane,two,3,iv in "Multicast-IGMP Snooping-Port Config". Please notation port 5 is not needed for IPTV services, and then nosotros do non enable port 5 for IGMP snooping. If the desktop computer is also to receive the multicast service, Merely Enable port 5.
Step 4: Create "VLAN 1" for IGMP snooping VLAN Config. In this instance, all devices are in VLAN1, and then we tin can create VLAN1 and enable the IGMP snooping for VLAN1. Or if your network has more than i VLAN in the multicast network, you should either create the VLAN ID needed for multicast service ane by i.
Step 5: Bank check the Multicast Table in "Multicast-Multicast Table", from the table, nosotros can conspicuously see that Port two and Port 3 and Port 4 are receiving different Programs (marked by dissimilar multicast IP address) via Port 1(Gateway Router Port) from the multicast source.
Notation: Port 5 is not going to receive any multicast data, so port five is not in the multicast table list.
Become to know more details of each part and configuration please go to Download Center to download the transmission of your product.
Is this faq useful?
Your feedback helps improve this site.
Subscribe TP-Link takes your privacy seriously. For farther details on TP-Link'southward privacy practices, see TP-Link'south Privacy Policy.
Be The First To Go Exclusive Deals & News
From Singapore?
Go products, events and services for your region.
Tp Link Tl Sg105 Igmp Snooping,
Source: https://www.tp-link.com/us/support/faq/1125/
Posted by: castilloshartair.blogspot.com
0 Response to "Tp Link Tl Sg105 Igmp Snooping"
Post a Comment